Quad Opteron Rackmount

Rackmount options:

Quad Opteron Rackmount Chassis, deep:26 in., SATA Backplane w/ 950W Redundant Power Supply.

System Board Support Tyan S4882 Quad Opteron M/B. 8 X 1" height hot-swap bays + 1 X 5.25" drive bay + 1 X Slim CD / FDD Combo SATA Backplane included Dimensions are: 7" (H) X 19" (W) X 26" (D)

Quad Opteron Rackmount Chassis, deep: 26 in., 24 X HDD w/ SATA Backplane & 1350W 3+1 Redundant Power.

Validated by Western Digital ( Special design for Tyan S4882 Quad Opteron M/B ).
To ensure Dual Core system stability, a 1050W ( minimum ) ATX12V Power Supply ( besides the 24 pins,both 4 pin and 8 pin + 12V power connector)is required.
24 X 1" height Hot-swappable SATA Trays
SATA Backplane included
1 X 5.25" Slim CD-ROM + 1 X 3.5" Slim Floppy Drive
1 X 3.5" External Drive Bay + 1 X 3.5" Internal Drive Bay
8 X 8 CM T32 ball-bearing fans in the middle
2 X Delta 6CM T38 + 2 X Sanyo Denki 4 CM T28 fans in the back
Free General Device: 24" Sliding Rail included ( Made in U.S.A. )
Dimensions are: 8.75"(H) X 19"(W) X 26"(D)

Quad Opteron Rackmount Chassis, deep: 26 in., 24 X HDD w/ SATA Backplane, Multi-Lane Cables & 1350W 3+1 Redundant Power

Validated by Western Digital (Special design for Tyan S4882 Quad Opteron M/B)
To ensure Dual Core system stability, a 1050W ( minimum ) ATX12V Power Supply ( besides the 24 pins,both 4 pin and 8 pin + 12V power connector)is required.
24 X 1" height Hot-swappable SATA Trays
SATA Backplane w/ Multi-Lane Cables included
1 X 5.25" Slim CD-ROM + 1 X 3.5" Slim Floppy Drive
1 X 3.5" External Drive Bay + 1 X 3.5" Internal Drive Bay
8 X 8 CM T32 ball-bearing fans in the middle
2 X Delta 6CM T38 + 2 X Sanyo Denki 4 CM T28 fans in the back
Free General Device: 24" Sliding Rail included ( Made in U.S.A. )
Dimensions are: 8.75"(H) X 19"(W) X 26"(D)

Top of this Quad Opteron Rackmount page.

ad-awere thus Ad Aware Anti-Spyware/Trackware software tool